Troubleshooting, 故障排除 – Samsung SC-HMX10C-XAA User Manual
Page 112
104_ English
troubleshooting
Adjusting the image during recording
Symptom
Explanation/Solution
Focus does
not adjust
automatically.
• Set
“Focus” to “Auto.” page 56
• The recording conditions are not suitable for
auto focus. Adjust the focus manually. page 57
• The lens is dusty on the surface. Clear the lens
and check the focus.
• Recording is being made in a dark place. Light
up to brighten the place.
The image
appears too bright
or flickering, or
changes in color.
• This may occur when you make a recording
under a fluorescent sodium, or mercury lamp.
Cancel
“Scene Mode (AE)” to avoid or
minimize this phenomenon. page 52
Image’s color
balance is not
natural.
• White balance adjustment is required. Adjust to
the proper
“White Balance.” page 53
The subject
passing by the
frame very fast
appears to bend.
• This is called the focal plane phenomenon.
This is not a malfunction. Because of the way
the image device (CMOS sensor) reads out
video signals, the subject passing by the frame
rapidly might appears to bend, depending on the
recording condition.
Playback on your HD camcorder
Symptom
Explanation/Solution
Using the playback
(Play/Pause)
function would not
start playing.
• Image files recorded using another device may
not be played on your HD camcorder.
• Check out the memory card compatibility.
page 29
臺灣 _
104
故障排除
在錄製過程中調整影像
症狀
說明 / 解決方案
無法自動調整
焦距。
• 將「
Focus」設定為「Auto」。 第 56 頁
• 錄製條件不適合自動對焦。手動調整焦距。
第 57 頁
• 鏡頭表面有許多灰塵。清除鏡頭上的水珠,
然後檢查對焦。
• 在黑暗中進行錄製。亮燈以照亮場地。
影像顯示太亮或
閃爍,或顏色
變更。
• 在螢光燈、鈉光燈或水銀燈下進行錄製時可
能會出現此現象。取消「
Scene Mode (AE)」
以避免或減輕此現象。
第 52 頁
影像的色彩平衡
不太自然。
• 需要進行白平衡調整。調整到適當的「
White
Balance」。
第 53 頁
快速經過幀的主
體顯示為彎曲。
• 這叫做焦點平面現象。這不是故障。由於影
像裝置(CMOS 感應器)讀出視訊訊號的方式,
快速經過幀的主體可能會視錄製情況而顯示
為彎曲。
在 HD 攝錄放影機上播放
症狀
說明 / 解決方案
使用播放(播放
/ 暫停)功能卻無
法開始播放。
• 使用其他裝置錄製的影像檔案可能無法在您
的 HD 攝錄放影機上播放。
• 檢查記憶卡相容性。 第 29 頁