Samsung SCH-U550ZNAVZW - Manual (Page 83)

Changing Your Settings 80
3. Enter the lock code (factory settings are the last four digits
of your telephone number) and press . The following
options appear in the display:
• Edit Codes: Allows you to change the Lock Code for Phone Only or
Calls & Services.
• Restrictions: Allows you to restrict the Location Setting (Lock/
Unlock Setting), Calls (Outgoing or Incoming calls), messages
(Outgoing or Incoming messages) and dial-up modems (Allow or
Block).
• Phone Lock Setting: Allows you to set the phone to Unlocked or
lock the phone On Power Up.
• Lock Phone Now: Allows you to lock the handset.
• Restore Phone: All settings are reset to factory default settings
and all user data is erased including pictures, videos, music,
messages, contacts, and downloaded applications stored on the
phone.
Edit Codes
The default lock code is the last four digits of your phone number.
Use Edit Code to change the code to a lock code of your choice.
1. From the home screen, press MENU. Press the
directional key right or left to highlight the Settings
& Tools menu. Press Phone Settings.
2. Press Security. You’re prompted to enter the lock
code. The default lock code is the last four digits of your
telephone number.
3. Enter the Lock Code and press . Several security
menus appear in the display.
4. Press Edit Codes. The following options display:
• Phone Only: Allows you to edit the lock code for only the handset.
• Calls & Services: Allows you to edit the lock code for all Calls &
Services.
5. Highlight an option and press . At the “ENTER NEW
CODE” prompt, enter the new lock code and press . At
the prompt, confirm new lock code.
6. At the “RE-ENTER NEW CODE” prompt, re-enter lock code
and press .
“PHONE ONLY CODE SET” or “CALLS & SERVICES CODE SET”
message appears in display confirming your lock code changed.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.