Avocent CPS810 - Manual (Page 80)

66 CPS Installer/User Guide
Show Server PPP command
The Show Server PPP command displays the current PPP settings that were configured with the
Server PPP command.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW SERVER PPP
Show Server RADIUS command
The Show Server RADIUS command displays the current CPS RADIUS settings that were
configured with the Server RADIUS command.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW SERVER RADIUS
Show Server Security command
The Show Server Security command displays the current authentication, connection and lock-out
settings that were configured with the Server Security and Server SSH commands.
Access right: SMON
Access level: ADMIN or APPLIANCEADMIN
Syntax
SHOW SERVER SECURITY
Connect Indicates whether a valid user on the serial CLI port may use the Connect command.
Modeminit string String used to initiate modem connections on the serial CLI port.
Server CLI Timeout
Session time-out value, shown in full minute or minute:second form (for example, 3m
for 3 minutes, 3:30 for 3 minutes, 3 seconds.
Local authentication Configured CLI port authentication setting (Enabled or Disabled).
Local preemption level
Preemption level to be used when authentication is disabled on the serial CLI port
and that port’s user attempts to connect to another serial port.
Table 5.30: Show Server CLI Command Display Fields (Continued)
Field Contents