Samsung SCH-A670ZSMXAR - Manual (Page 137)

Setup 129
2. Use the navigation keys to highlight the desired setting,
then press .
Data
Use the Data sub menu to set the Auto Detect feature for
when you receive data and to set the Data Baud Rate.
1. In standby mode, press the left soft key ( ) Menu , then
press , , for Data . The sub menus listed in the
following table appear in the display.
2. Use the navigation key to highlight the Data sub menu of
your choice, then press
.
3. Use the navigation key to highlight Auto Detect or Baud
Rate , then press .
4. Select the Auto Detect or Baud Rate settings as desired.
Call Answer
You can select a specific answer mode when you receive an
incoming call. Your phone can be preset to answer when you
do any of the following:
•
Send key : Press to answer an incoming call.
•
Folder open : Open the folder to answer an
incoming call.
• Any key : Press any key except to answer an
incoming call.
Sub menu Function
Auto Detect
Set data auto detect capabilities. Options are
data off, data for next call, and data until powered
off.
Baud Rate
Set the baud rate for data connections. Options
are Auto, 19200, 38400, 57600, 115200,
and 230400.
MetroA670.book Page 129 Friday, November 12, 2004 12:03 PM