Samsung SCH-R570ZBAMTR - Manual (Page 69)

Settings 66
Emergency #
The Emergency # option lets you enter and store up to three
emergency numbers in your phone. Each number can be up to 32
digits long. You can dial your emergency numbers any time, even
when your phone is locked or restricted.
Emergency number 911 is hard-coded into your phone. You can
dial this number any time, even when the phone is locked or
restricted. If you call 911 you will hear audible tone and an
Emergency prompt will displays on the screen for the duration of
the call.
Important!: Because of various transmission methods, network parameters,
and user settings used to complete a call from your wireless
phone, a connection cannot always be guaranteed. Therefore,
emergency calling may not be available on all wireless networks
at all times.
DO NOT depend on this phone as a primary method of calling
911 or for essential or emergency calls.
Remember to always turn your phone on and check for adequate
signal strength before placing an emergency call.
Note: When you dial an emergency number, you phone locks itself to the
emergency location that answered the call and locks itself in 911-Only
mode, blocking from dialing any number but an emergency number.
• To store emergency numbers: Select the Emergency # option, then
select one of the three emergency number options, and enter and save
your new emergency number.
• To call emergency numbers (even in lock mode): Simply enter 911 or
one of your emergency numbers and press to place the call.
Reset Phone
The Reset Phone option returns all settings on your phone (except
for Contacts entries) to their factory default values.
Caution!: Before selecting Reset Phone, contact your Wireless Carrier.
Invoking Reset Phone may erase settings made by your Wireless
Carrier from your phone, resulting in loss of service.
Erase All Entries
The Erase All Entries option deletes all entries from the
Contacts list.
Restriction
The Restriction option settings let you restrict the use of your
phone for Calls (Incoming and Outgoing), SMS Messages (Incoming
and Outgoing), MMS Messages (Incoming and Outgoing), or
Data calls. Restriction settings for data calls are Allow All or
Allow None.
Note: The default restriction settings are all Off.