Samsung PN59D530A3FXZA User Manual
Page 9
9
01
Getting Started
English
Connecting to an Antenna
Connecting the Power cord and an antenna or cable connection
✎
The PDP device may interfere with an amateur radio or AM radio.
✎
Using two-way radio mobile and portable units or amateur radio or AM radio near your TV may cause the TV to
malfunction.
✎
When you move or swivel the TV with Antenna cable tightly connected, there is high risk antenna jack on TV will be
broken off.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P button. Plug & Play is available only when the Input source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting a language
Press the
▲ or ▼ button, then press the
ENTER
E button. Select the
desired OSD (On Screen Display) language.
P
POWER
2
Selecting Store Demo
or Home Use
Press the
◄ or ► button, then press the
ENTER
E button.
y
Select the Home Use mode. Store Demo mode is for retail
environments.
y
To return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you see the
volume OSD, press and hold
MENU
for 5 sec.
3
Selecting an antenna
Press the
▲ or ▼ button, then press the
ENTER
E button. Select Air, Cable or Auto.
4
Selecting a channel
Press the
▲ or ▼ button, then press the
ENTER
E button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel
→ Auto Program (p. 14).
✎
Press the
ENTER
E button at any time to interrupt the memorization process.
5
Setting the Clock
Mode
Set the Clock Mode automatically or manually.
y
Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
y
Manual: Allows you to manually set the current date and time (p. 19).
6
View the HD
Connection Guide.
The connection method for the best HD screen quality is displayed.
7
Enjoy your TV.
Press the
ENTER
E button.
If You Want to Rerun Plug & Play...
O
MENU
m → Setup → Plug & Play →
ENTER
E
✎
NOTE
y
To change the TV’s setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.
When you see the volume bar on the screen, press and hold the
MENU
button on the TV for 5 sec.
ANT OUT
or
VHF/UHF Antenna
Cable
Power Input
Antenna Cable (Not Supplied)
[PD530-ZA]BN68-03689A-01Eng.indb 9
2011-06-30 오후 1:18:59