Samsung SR-T03BEBB - Manual (Page 7)

10 9
Connect the jumper to the slot in the back of the DVD-MULTI drive.
When you connect the jumper to MA (Master), the drive runs as the master,
and when you connect it to SL (Slave), the drive runs as the slave.
When you connect it to CS (CSEL), you can control the device using the host
interface signal CSEL.(Connection to MA is recommended.)
Connect the Sound Output Port in the back of the DVD-MULTI drive to the audio
input port of the sound card using the audio cable (with four pins) to hear the sound
from the drive.
CS : Cable Select(CSEL)
SL : Slave
MA: Master
Insert the CD provided with the DVD-MULTI drive to install the device program.
The program runs automatically. If the automatic start fails, find the setup.exe file in the CD-ROM drive
folder using Windows Explorer and double-click it.
1
Steps 1 & 2 are the same as in Windows 98/Me.
Click [Finish] after completing Steps 1 & 2. 1
Click [Driver and Formatter Setup]
Once the installation process begins,
follow the instructions.
2
Check [Yes, I want to restart my
computer now] and click [Finish].
Use the DVD-MULTI drive after
rebooting the system.
See page 12 to confirm that the
program is installed properly.
Use the DVD-MULTI drive after rebooting the system.
See page 12 to confirm that the program is installed properly.
3
When you click [Finish], the system
automatically detects the DVD-RAM device. 2
Click [Yes] if a dialogue box message
shown in the left appears after installing the
DVD-RAM drive. 3