Set call ringer volume, Adjust the ringer, Call answer – Samsung SCH-U520ZNAUSC User Manual
Page 28
28
•
Different ring types or melodies to distinguish callers.
•
Name display with caller ID. (If the caller’s name is programmed into your
Contacts).
•
Information about the last 90 each incoming, missed, and outgoing calls are
automatically stored to a call log.
Set Call Ringer Volume
1.
In standby mode, press the volume key ( ) on the left side of the phone.
2.
Press the volume key up or down to set the call ringer volume as desired.
Adjust the Ringer
1.
In standby mode, press the volume key ( ) on the left side of the phone up
or down. Options are:
2.
Press
once you’re satisfied with the setting. The phone returns to
standby mode.
Tip: Tip: You can also enter the Volume sub-menu by pressing the MENU key (
), then pressing
(for Sounds),
(for
Volume), and
for Voice Calls. Use the volume key to adjust the ringer
setting.
Note: Note: The vibrate icon (
) appears in the display when the phone is in Vibrate mode. The vibrate
plus ring icon (
) appears in the display when the phone is in Vibrate/High mode.
Call Answer
Select from three methods for answering calls. This option can be changed in the
Settings menu.
1.
In standby mode, press the MENU key (
), then press
(for
Settings),
(for
Call Settings), and
for Call Answer. The
following options appear in the display:
• Any Key — Pressing any key except
or
answers a call.
• Send Only — Only pressing
answers a call.
• Flip Open — Opening the phone or pressing
answers a call.
2.
Use the navigation keys to highlight the Call Answer option of your choice.
3.
Press
to activate the method for answering calls.
• Ringer Off
• Medium
• Vibrate
• Medium/High
• Low
• High
• Low/Medium
• Vibrate/High
OK
OK
@
)
)
@
)
)
OK
@
)
)
END
SEND
SEND
OK