Samsung YP-GI1CB-XAA - Manual (Page 143)

Settings 139
Brightness
Configures the LCD brightness levels.
1. From a Home screen, touch (Menu) ➔ Settings
➔ Display.
2. Touch Brightness.
3. Touch and drag the slider to set the brightness and
touch OK.
Auto-Rotate Screen
Used to switch the display orientation automatically when
you rotate the device.
1. From a Home screen, touch (Menu) ➔ Settings
➔ Display.
2. Touch Auto-rotate screen to enable or disable the
mode. When enabled, a check mark appears in
the check box.
Animation
Sets whether some or all of the window elements animate.
1. From a Home screen, touch (Menu) ➔ Settings
➔ Display.
2. Touch Animation.
3. Touch No animation, Some animations, or All
animations.
Screen Timeout
Adjusts the delay time before the screen automatically turns
off.
1. From a Home screen, touch (Menu) ➔ Settings
➔ Display.
2. Touch Screen timeout.
3. Touch 15 seconds, 30 seconds, 1 minute, 2 minutes,
10 minutes, or 30 minutes.
Gyroscope Calibration
Lets you horizontally calibrate your display using the
accelerometer.
1. From a Home screen, touch (Menu) ➔ Settings
➔ Display.
2. Touch Gyroscope calibration.
3. Place your device on a level surface and touch
Calibrate.