Samsung UN75F6400AFXZA - Manual

BN68-05123A-03
QUICK START
GUIDE
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included in this box
Remote Control Stand Parts and Cables
Smart Touch Control Power cord IR extender
x 4
x 2
Batteries (AAA x 2) Wall mount adapter Stand Cover
x 2
Cable manager
Also included: User manual, regulatory guide, 3D Active Glasses
Step 1
Attach the TV to
the Stand
Step 2
Connect video
devices
Step 3
Using the Smart
Touch Control
Step 4
Power on and
start the initial
setup
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1 Attach the TV to the Stand
1A Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
1B
x 2
Leg
x 4
Screws
Find the stand leg and screws in the box and
set aside.
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
1C Insert the stands into the grooves on both
sides on the bottom of the TV’s back.
1D x4 (M4 X L12) Insert 4 screws and secure the stand to the TV.
1E Place the stand covers on the stands and press
them until they click in place.
To detach the stand covers from the TV, use a flat screwdriver.
Insert a flat screwdriver into the gap at the bottom of the stand covers, and pull it up until
they separate.
[ Be careful not to scratch the stand with the screwdriver.
1F Put up the TV with assistance from a person
after attaching the stands to the TV.
[UF6400-75inch_QSG]BN68-05123A-03ENG.indb 2 2013-10-25 �� 7:01:16