Samsung BD-P1200-XAA - Manual (Page 22)

English
- 21
C
onnecting
Connecting to an Audio System
(Dolby Digital, MPEG2 or DTS
Amplifier)
1. If using an optical cable (not included), connect the
DIGITAL AUDIO OUT (OPTICAL)
terminal on the rear
of the Blu-ray disc player to the
DIGITAL AUDIO IN
(OPTICAL)
terminal of your Amplifier.
If using a coaxial cable (not included), connect the
DIGITAL AUDIO OUT (COAXIAL)
terminal on the rear
of the Blu-ray disc player to the
DIGITAL AUDIO IN
(COAXIAL)
terminal of the Amplifier.
2. Using the video signal cable(s), connect the
HDMI
OUT, COMPONENT, S-VIDEO,
or
VIDEO
terminals on
the rear of the Blu-ray disc player to the
HDMI IN,
COMPONENT, S-VIDEO,
or
VIDEO
terminals of your
TV as described on pages 17 to 20.
3. Turn on the Blu-ray disc player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select
the
external input
in order to hear sound from the
Blu-ray disc player. Refer to your Amplifier's user
manual to set the Amplifier's audio input.
LAN
or
■ Please turn the volume down when you turn
on the Amplifier. Sudden loud sound may
cause damage to the speakers and your ears.
■
Please set the audio in the menu screen
according to the Amplifier.
(See pages 38~39)
■
The position of terminals may vary
depending on the Amplifier. Please refer to
the user's manual of your Amplifier.
NOTE
Connecting to an Audio System
(5.1 Channel Amplifier)
1. Using the audio cables, connect the
5.1 ANALOG
AUDIO OUT (Front R, Front L, CENTER,
SUBWOOFER, REAR L, REAR R)
terminals on the
rear of the Blu-ray disc player to the
5.1 Channel
ANALOG AUDIO IN (Front R, Front L, CENTER,
SUBWOOFER, REAR L, REAR R)
terminals of your
Amplifier.
2. Using the video signal cable(s), connect the
HDMI OUT,
COMPONENT, S-VIDEO,
or
VIDEO
terminals on the
rear of the Blu-ray disc player to the
HDMI IN,
COMPONENT, S-VIDEO,
or
VIDEO
terminal of your TV
as described on pages 17 to 20.
3.Turn on the Blu-ray disc player, TV and Amplifier.
4. Press the input select button of the Amplifier to select
external input
in order to hear sound from the
Blu-ray disc player. Refer to your Amplifier's user
manual to set the Amplifier's audio input.
LAN
5.1 Channel Amplifier
■ Please turn the volume down when you
turn on the Amplifier. Sudden loud sound
may cause damage to the speakers and
your ears.
■
Please set the audio in the menu screen
according to the Amplifier.
(See pages 38~ 39)
■
The position of terminals may vary
depending on the Amplifier.
Please refer to the user's manual of your
Amplifier.
■
When using this connection, Blu-Ray discs
with an LPCM audio soundtrack will only be
heard over the front two channels.
NOTE