Atlantis Land Mistral Lan Router ISDN - Manual (Page 21)

Add the following Single Workstation dialing into the router using the CLI Advanced Mode
Router>>> add user u2
Add new user profile "u2" ...
user name (Unspecified): user2
user password (Unspecified): ***
password confirm (***): ***
enable call back (No, yes/no): y
call back number (Unspecified): 5554444
enable caller ID authenticatication (N0, yes/no): yes
caller ID (Unspecified): 5556666
multilink option (No, no/loadsharing/overflow): over
second caller ID (Unspecified): 5557777
second call back number (Unspecified): 5557777
compression (No, no/stac):
idle timeout (120, 0[none]-3600):
enable IP (Yes, yes/no):
use dynamic IP address assignment? (Yes, yes/no): yes
bridging (No, yes/no):
delete user <profile name>
Description: Deletes a dial-in user entry from the local user database.
show user [profile name]
Description: Displays the current local profile database.
Example 1: Without the user name parameter the output appears as follows.
Router> show user
profile name: u2
user name: user2 dial in from: Workstation
enable IP: Yes IP RIP: Disable
profile name: u1
user name: user1 dial in from: Workstation
enable IP: Yes IP RIP: Disable
Example 2: When a specific user is named, the output appears as follows:
Router> show user u1
Profile name: u1
User Name: user1 Dial In From: Workstation
Port Type: ISDN Multilink: No