Samsung HM6450 - Manual (Page 16)

14
Command Action
“Redial Two”
Redial the latest number you called on
the currently connected secondary phone.
“Call 1”, “Call 2” or “Call 3” Call the corresponding speed dial stored on your
phone.
“Multi Point Setting”
Check the status of Multi-Point mode, and turn
it on or off.
Say “Yes” or “No” to change the mode.
“Check Battery”
Check the battery level on the headset and
the currently connected phone.
“Phone Voice Command”
Access the voice dialing feature of the currently
connected primary phone, if the phone supports it.
“Phone Voice Command
Two”
Access the voice dialing feature of the currently
connected secondary phone, if the phone
supports it.
“Command List” Read out the list of voice commands.