Factory setting parameters – ACTiSYS RS232 User Manual
Page 7
Advertising
The Wireless Connectivity Expert
ACT-BT5701S v2
User’s Manual
8. FACTORY SETTING PARAMETERS
When using ACT-BT5701S v2 with your serial devices, make sure all the settings match on
both sides. Otherwise, you may encounter communicating problems. Below figure is the
default factory setting parameters of this unit:
NOTE: If it requires you to change any of the settings, consult the configuration Chapters 9
and 10 for detail parameters and procedure.
Copyright 2005-2006 ACTiSYS Corp. Page
7
of
18
ACTiSYS Confidential Information
Dec 06, 2006
Version 2.0
Advertising