Samsung LE46C570J1S - Manual (Page 16)

16
English
Basic Features
Picture Options
In PC mode, you can only make changes to the
✎
Colour
Tone, Size and Auto Protection Time.
Picture Options
Colour Tone : Normal ►
Size : 16:9
Screen Mode : 16:9
Digital Noise Filter : Auto
MPEG Nosie Filter : Auto
HdMI Black level : Normal
Film Mode : Off
▼
U Move E Enter R return
Colour Tone (Cool / Normal / Warm1 / Warm2) ■
Warm1
✎
or Warm2 will be deactivated when the
picture mode is Dynamic.
Settings can be adjusted and stored for each
✎
external device connected to an input on the TV.
Size ■ : Your cable box/satellite receiver
may have its own set of screen
sizes as well. However, we highly
recommend you use 16:9 mode most
of the time.
Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratio.
16:9 : Adjusts the picture size to 16:9 for DVDs or wide
broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.
Adjusts the Position by using
✎
▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.
Adjusts the Position or Size by using
✎
▲, ▼ button.
4:3 : The default setting for a movie or normal
broadcasting.
Do not watch in 4:3 format for a long time. Traces
✎
of borders displayed on the left, right and centre
of the screen may cause image retention(screen
burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.
NOTE
✎
After selecting x Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the
◄ or ► button to select Position.
2. Press the ENTER E button.
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
Depending on the input source, the picture size x
options may vary.
The available items may differ depending on the x
selected mode.
In PC mode, only
x 16:9 and 4:3 modes can be adjusted.
Settings can be adjusted and stored for each external x
device connected to an input of the TV.
If you use the
x Screen Fit function with HDMI 720p input,
1 line will be cut at the top, bottom, left and right as in
the overscan function.
■ Screen Mode (16:9 / Wide Zoom / Zoom / 4:3): Available
only when picture size is set to Auto Wide.
You can determine the desired picture size at the 4:3
WSS (Wide Screen Service) size or the original size. Each
European country requires different picture size.
Not available in PC, Component or HDMI mode.
✎
Digital Noise Filter (Off / Low / Medium / High / Auto / ■
Auto Visualisation): When the broadcast signal is weak,
some static and ghosting may appear. Select one of the
options until the best picture is displayed.
Auto Visualisation: When changing analogue channels,
displays signal strength.
Only available for analogue channels.
✎
When bar is green, you are receiving the best
✎
possible signal.
MPEG Noise Filter (Off / Low / Medium / High / Auto) ■ :
Reduces MPEG noise to provide an improved picture
quality.
Disabled under PC mode.
✎
HDMI Black Level (Normal / Low) ■ : Selects the black level
on the screen to adjust the screen depth.
Available only in HDMI mode (RGB signals).
✎
Film Mode (Off / Auto1 / Auto2) ■ : Sets the TV to
automatically sense and process film signals from all sources
and adjust the picture for optimum quality.
Available in TV, AV, COMPONENT (480i / 1080i) and
✎
HDMI (480i / 1080i).
Auto Protection Time (2 hours / 4 hours / 8 hours / 10 ■
hours / Off) : If the same image remains on the screen, Auto
Screen Burn Protector will work.
BN68-02791AEGH_00Eng.indb 16 3/9/2010 1:06:15 PM