AEG BS7304001 - Manual (Page 24)

Removing the shelf support
1. Carefully pull the support up and out of
the front catch.
2. Lightly move the support on the front
catch inwards.
3. Pull the support out of the rear catch.
Installing the shelf support
Install the shelf support in the opposite sequence.
Steam generation system
CAUTION!
Dry the steam generator after each use. Soak up water with the Sponge.
Remove a limescale with water and vinegar.
CAUTION!
Chemical de-scaling agents can cause a damage to the enamel. Obey instructions of the
manufacturer!
24 Care and cleaning