American Megatrends MEGAPLEX II 4U MAN-782-CH4 User Manual
Page 18
Advertising
12 Megaplex II 4U Chassis Guide
Drive Installation,
Continued
Step 6
Line up the holes in the brackets and the screw holes in the back of the drive. The back of the
bracket is shown below.
Step 7
Insert the screws through the screw holes and the brackets and tighten all four screws.
Step 8
After the drive is securely attached to the bracket, slide the bracket into the slot in the drive bay.
Step 9
Tighten the thumbscrew and flip the black latch up into a vertical position.
Advertising