Agilent Technologies hard disk drive kit e5052-90202 - Manual (Page 6)

6 Chapter 2
Option Installation
Introduction
Introduction
This chapter describes the procedure to install Option 018 into the E5052B. The procedure
consists of the following items.
• Installation Requirement
• Saving System calibration Data from Removable Hard Disk to USB Pen Drive
• Removing Removable Hard Disk
• Mounting Removable Hard Disk
• Initial Registration of E5052B
• Calibration of the Touch Screen
• Recalling System Calibration Data from USB Pen drive to Removable Hard Disk
Procedure
Installation Requirement
• 5188-4426 Key for Hard Disk Carrier
• USB Pen Drive (Over 512MB)