Initial setup – Samsung UE60EH6000S User Manual
Page 5
English - 5
English
1. Menu Language: Selecting a menu language
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the desired OSD (On Screen Display) language.
2. Use Mode: Selecting Store Demo or Home Use
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the Home Use mode. Store Demo mode is for retail
environments.
✎
When pressing TV controller, the function menu screen
appears. Select the MENU(m) and press it more than
5 seconds using the controller. The Store Demo mode
is set.
✎
Cancel the Store Demo by selecting Source(
) and
pressing it more than 5 seconds.
✎
Store Demo is only for shop display. If you select it,
several functions are not able to use. Please select Home
Use when you watch at home.
3. Country
(Depending on the country): Selecting a
country
Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the appropriate country.
✎
After selecting the country in the country menu, some
models may proceed with an additional option to setup
the pin number.
4. Auto Tuning (Step 1): Selecting how you watch your
TV
Let’s find and store channels on your TV. Do you need to
search for channels?
• Yes, I need to.: Memorises all of the available channels
using RF cable.
• No, I don’t need to.: You don’t need to use Auto Tuning to
find channels.
5. Auto Tuning (Step 2): Selecting a search options
Select the desired broadcasting signal and antenna source.
Press the
▲/▼/◄/► button, then press the
ENTER
E
button.
When setting the antenna source to Cable, a step appears
allowing you to assign numerical values (channel frequencies)
to the channels. For more information, refer to Channel
→
Auto Tuning.
✎
When Air or Cable is selected first: After all Air or
Cable channels are stored, the step for storing Satellite
channels is displayed.
✎
When Satellite is selected first: After all Satellite
channels are stored, the step for storing Air or Cable
channels is displayed.
✎
Press the
ENTER
E button at any time to interrupt the
memorisation process.
✎
See e-Manual chapter “Retuning Channels > Auto
Tuning”
6. Clock: Setting the Clock Mode
• Auto: Set the current time automatically.
• Manual: Allows you to manually set the current date and
time.
7. Setup Complete
Press the
ENTER
E button.
✎
The completed settings are displayed.
If You Want to Reset This Feature...
You should do Setup (
MENU
→ System) again at home
although you did in shop.
Select System - Setup (Initial Setup). Enter your 4 digit PIN
number. The default PIN number is “0-0-0-0” (except France).
If you want to change the PIN number, use the Change PIN
function.
✎
If you forget the PIN code, press the remote control
buttons in the following sequence in Standby mode, which
resets the PIN to “0-0-0-0” (France: “1-1-1-1”):
POWER
(off)
→
MUTE
→ 8 → 2 → 4 →
POWER
(on).
Initial Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button. Setup is available only when the source is set to TV.
[UEH6000-XNZF]BN68-04634F.indb 5
2012-07-26 5:20:18