Allied Telesis AT-UWC Wireless LAN Controller - Manual (Page 15)

Installation Guide
15
Changing the IP Address
When you access the AT-UWC WLAN Controller from the management
workstation, it must have an IP address form the same network as the
AT-UWC WLAN Controllerserver.
The procedures for changing the IP address is slightly different among
Windows Operating Systems. The following is the procedures using
Windows 7 as an example.
To change the IP address of a PC installed on Windows 7, do the
following:
1. Click Control Panel from the Start button.
The control panel appears as shown in Figure 12.
Figure 12. Control Panel
2. Click Category at the upper right corner of the window and select
Large icons.
Control Panel displays items with large icons as shown in Figure 13 on
page 16.