Audiovox GMRS600SLK User Manual

Page 16

Advertising
background image

128-

7521

16 of 28

NOTE:

Pressing the PTT button during dual watch mode will transmit

on the primary channel and suspend dual watch operation for

5 seconds. Dual watch mode will then resume.

- Momentarily press the SCAN button to exit the dual watch mode.

Key Tone

This feature allows the transceiver to sound a confirmation tone when-

ever the following keys are pressed: Monitor (M) Button, Up/Down But-

tons, MODE Button or SCAN Button.

To turn the key tones on or off:

- From GMRS/FRS standby mode, press the MODE Button 6 times

(5 times for FRS) until the Bell ( ) icon flashes, and

on

or

oF

ap-

pears on the display.

- Press the Up or Down Button to toggle the key tone feature On or

Off.

- Press the PTT button momentarily to confirm selection.

When the key tone feature is on, the Bell icon appears steady on the

display, and the beep tones sound in response to button activation.

Roger Beep Tone

The Roger Beep is a tone which is automatically transmitted whenever

the PTT button is released. This tone alerts the receiving party that the

transmission has been terminated intentionally.

To enable and disable the Roger Beep tone:

- From GMRS/FRS standby mode, press the MODE Button 7 times

(6 times for FRS) until the flashing Roger Beep icon (

) and

on

or

oF

appears on the display.

- Press the Up or Down button to select the tone on or off as desired.

- When enabled, the tone icon (

) appears steady on the display.

- Press the PTT button momentarily to confirm selection.

16

Advertising