Document Outline

• Contents
• Figures
• Tables
• Preface
  • Safety Symbols Used in this Document
  • Contacting Allied Telesis
• Chapter 1
• Overview
  • Introduction
  • AT-SBx8112 Chassis
    • Ethernet Line and Controller Cards Slots
    • Power Supply Slots
  • AT-SBx81GT24 Line Card
  • AT-SBx81GT40 Line Card
  • AT-SBx81GP24 PoE Line Card
  • AT-SBx81GS24a SFP Line Card
  • AT-SBx81XS6 SFP+ Line Card
  • 10/100/1000Base-T Twisted Pair Ports
    • Connector Type
    • Speed
    • Duplex Mode
    • Maximum Distance
    • Cable Requirements
    • Automatic MDIX Detection
    • Port Pinouts
  • Power over Ethernet on the AT-SBx81GP24 Line Card
    • Powered Device Classes
    • Power Budgeting
    • PoE Wiring
  • Port LEDs on the Ethernet Line Cards
    • AT-SBx81GT24 Line Card
    • AT-SBx81GT40 Line Card
    • AT-SBx81GP24 Line Card
    • AT-SBx81GS24a Line Card
    • AT-SBx81XS6 Line Card
  • AT-SBx81CFC400 Controller Fabric Card
    • SYS Status LEDs
    • SBx STATUS LEDs
    • eco-friendly Button
    • Reset Button
    • NET MGMT Port
    • NET MGMT LED
    • Console (RS-232) Port
    • USB Port
  • AT-SBxPWRSYS1 Power Supply
    • LEDs
  • AT-SBxPWRPOE1 Power Supply
    • LEDs
  • AT-SBxPWRSYS1 DC Power Supply
    • LEDs
  • AT-SBxFAN12 Module
    • LED
  • Power Supply Interfaces (Opto-couplers)
    • LED
  • AlliedWare Plus Software Releases for the Hardware Components
• Chapter 2
• Safety Precautions and Site Requirements
  • Reviewing Safety Precautions
  • Selecting a Site for the SwitchBlade x8112
  • Installation Tools and Material
• Chapter 3
• Installing the Chassis in an Equipment Rack
  • Required Tools and Material
  • Preparing the Equipment Rack
  • Unpacking the AT-SBx8112 Chassis
  • Adjusting the Equipment Rack Brackets
  • Installing the AT-SBx8112 Chassis in the Equipment Rack
  • Removing the Shipping Brace
  • Installing the Chassis Grounding Lug
• Chapter 4
• Installing the Power Supplies
  • Protecting Against Electrostatic Discharge (ESD)
  • Installing the AT-SBxPWRSYS1 AC System Power Supply
  • Installing the AT-SBxPWRPOE1 PoE Power Supply
  • Installing the AT-SBxPWRSYS1 DC System Power Supply
• Chapter 5
• Installing the AT-SBx81CFC400 Control Card and Ethernet Line Cards
  • Guidelines to Handling the Controller and Line Cards
  • Installing the AT-SBx81CFC400 Controller Fabric Card
  • Installing the Ethernet Line Cards
  • Installing the Blank Slot Covers
• Chapter 6
• Installing the Transceivers and Cabling the Ports
  • Cabling Guidelines for the Twisted Pair Ports on the AT-SBx81GT24, AT-SBx81GT40, and AT-SBx81GP24 Line Cards
    • Connecting Cables to the AT- SBx81GT40 Line Card
  • Guidelines to Installing SFP and SFP+ Transceivers
  • Installing SFP Transceivers in the AT-SBx81GS24a Line Card
  • Installing SFP+ Transceivers in the AT-SBx81XS6 Line Card
  • Installing AT-SP10TW Cables in the AT-SBx81XS6 Line Card
  • Cabling the NET MGMT Port on the AT-SBx81CFC400 Card
• Chapter 7
• Powering On the Chassis
  • Verifying the Installation
  • Powering On the AT-SBxPWRSYS1 AC System Power Supply
  • Powering On the AT-SBxPWRPOE1 Power Supply
  • Powering On the AT-SBxPWRSYS1 DC System Power Supply
    • Choosing a Method for Attaching the Grounding Wire
    • Connecting the Grounding Wire with the Grounding Terminal
    • Connecting the Grounding Wire with Bare Wire
    • Choosing a Method for Attaching the Power Wires
    • Connecting the DC Power Wires with the Straight Terminals
    • Connecting the DC Power Wires with the Right Angle Terminals
    • Connecting Bare DC Power Wires
  • Monitoring the Initialization Process
    • Using the LEDs to Monitor the Initialization Process
    • Using the Console Port to Monitor the Initialization Process
• Chapter 8
• Verifying the Hardware Operations of the Chassis
  • Using the LEDs to Verify the Chassis
  • Using Local Management to Verify the Chassis
    • Starting a Local Management Session
    • Entering the AlliedWare Plus Operating System Commands
• Chapter 9
• Troubleshooting
  • AT-SBxPWRSYS1 and AT-SBxPWRPOE1 AC Power Supplies
  • AT-SBxPWRSYS1 DC System Power Supply
  • Ethernet Line Cards
  • Twisted Pair Ports
  • Power Over Ethernet
  • Fiber Optic Transceivers
  • AT-SBx81CFC400 Controller Fabric Card
  • AT-SBxFAN12 Fan Module
  • Local (Out-of-Band) Management Session
  • Power Supply Interfaces (Opto-couplers)
• Chapter 10
• Replacing Modules
  • Replacing AT-SBxPWRSYS1 AC and AT-SBxPWRPOE1 Power Supplies
  • Replacing the AT-SBxPWRSYS1 DC Power Supply
  • Replacing Ethernet Line Cards
  • Replacing the AT-SBx81CFC400 Controller Fabric Card
  • Replacing the AT-SBxFAN12 Fan Module
    • Removing the AT-SBxFAN12 Fan Module
    • Installing a New AT-SBxFAN12 Fan Module
• Appendix A
• Technical Specifications
  • Physical Specifications
  • Environmental Specifications
  • Power Specifications
  • Safety and Electromagnetic Emissions Certifications
  • Port Pinouts