System leds on ar415s – Allied Telesis AR400 Series Router User Manual
Page 15
Advertising

14
AR400 Series Router
613-000313 Rev D
System LEDs on AR415S
The LEDs described in the following table show the operational status and port
activity for the AR415S router.
LED
State
Function
PWR
Green
The router is receiving power and the power
switch is ON.
SYS
Amber
Lit briefly during router start up, or the router is
malfunctioning.
Off
Normal operation.
PIC 0
Green
A port interface card (PIC) is correctly installed
and has been detected by the router.
Off
No PIC is installed, or the router has not
recognised the PIC.
Full
Green
The link is in full-duplex mode.
Off
The link is in half-duplex mode.
L/A
Green
A link has been established.
Flashing
Data is being transmitted.
Off
There is no link.
100M
Green
The link is at 100 Mbps speed.
Off
The link is at 10 Mbps speed.
Advertising