Allied Telesis AT-FS708/POE - Manual (Page 35)

AT-FS708/POE Fast Ethernet Switch Installation Guide
35
Unpacking the Switch
To unpack an AT-FS708/POE Fast Ethernet switch, perform the following
procedure:
1. Remove all components from the shipping package.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Place the switch on a level, secure surface.
3. Ensure the following hardware components are included in your switch
package. If any item is missing or damaged, contact your Allied Telesis
sales representative for assistance.
ˆ Two wall mounting brackets
ˆ Four plastic anchors
ˆ Four self-tapping phillips-head screws
ˆ Two rack mounting brackets
ˆ Six mounting bracket screws
ˆ Four rack mount screws
ˆ Four self-adhesive rubber feet (for desktop use)
ˆ One AC power cord