Allied Telesis AT-2912T - Manual (Page 28)

Chapter 2: Installing the Hardware
28
Replacing the
Standard Bracket
To replace the standard bracket with the low-profile bracket, perform the
following procedure:
1. Remove the screws that attach the bracket to the adapter. See
Figure 7.
Figure 7. Removing the Standard Bracket
2. Align the tabs of the low-profile bracket with the holes on the adapter
and fasten the screws onto the adapter. See Figure 8.
Figure 8. Fastening Screws onto Low-Profile Bracket
1888
TX
RX
100
1889
TX
RX
100