Allied Telesis AT-S87 - Manual (Page 23)

AT-S87 Management Software User’s Guide
23
Configuring System Administration Information
You can allow multiple users to access and administer the system by
adding their passwords to the system and/or set up password protection.
Note
When you start up the switch for the first time, you should add a user
to the system, protected by a password, who will be managing the
switch.
Adding an
Administrative
User
To add an administrative user to the system, perform the following
procedure:
1. From the main menu, select System > Administration.
The Administration page is shown in Figure 4.
Figure 4. Administration Page
2. In the User Name field, type a name for the new administrative user.
3. In the Password field, type a password for the user, and re-type the
name in the Confirm Password field.
4. Do one of the following:
ˆ Click Add to add the user.
ˆ Click Reload to clear the fields and start over.
5. Click OK.