American Standard ASYSTAT500C - Manual (Page 59)

59
Pub. No. 12-5029-01
69-1617
3. Press Increase ▲ or Decrease ▼
until the desired temperature setpoint
displays.
By pressing Increase ▲ or Decrease ▼ after pressing , you select
the cooling temperature. Example display shows Cool is set for 75 ° .
NOTICE: This equipment is a Class B digital apparatus, which complies with Canadian Radio Interference
Regulations, CRC c. 1374.
CAUTION
Equipment Damage Hazard.
Can cause permanent damage to the compressor or other equipment.
To avoid possible equipment damage, do not operate cooling when outside temperature is below 50°F
(10°C). See equipment manufacturer instructions. To avoid possible compressor damage, allow the
compressor to remain off for five minutes before restarting.
M14606
Cool
Setting