Displaying the dos settings, Figure 70: dos tab (monitoring) – Allied Telesis AT-S63 User Manual
Page 189
Advertising
AT-S63 Management Software Web Browser User’s Guide
Section II: Advanced Operations
189
Displaying the DoS Settings
To display the DoS settings, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select Network Security.
3. Select the DoS tab.
The DoS tab is shown in Figure 70.
Figure 70. DoS Tab (Monitoring)
4. Click the port whose DoS settings are to be displayed. You can select
more than one port at a time.
5. Using the DoS Type list, select the type of Denial of Service defense
whose settings are to be displayed.
6. Click View.
Advertising