Allied Telesis AT-S102 - Manual (Page 99)

99
Chapter 5
Configuring the AT-CV5M02
Management Card
This chapter has the following sections:
ˆ “Assigning an IP Address Configuration” on page 100
ˆ “Assigning a Name” on page 104
ˆ “Assigning Contact and Location Information” on page 106
ˆ “Configuring the SNMP Community Strings” on page 108
ˆ “Specifying the IP Addresses of the SNMP Trap Receivers” on
page 110
ˆ “Configuring the Management Security” on page 111
ˆ “Enabling or Disabling the Web Server” on page 114
ˆ “Manually Setting the Date and Time” on page 115
ˆ “Configuring the Network Time Protocol Client” on page 117
ˆ “Resetting the Management Card” on page 119
ˆ “Viewing the Event Log” on page 122
ˆ “Viewing the Activity Monitor” on page 130
ˆ “Configuring the Syslog Client” on page 131
ˆ “Configuring the 10/100Base-TX Port” on page 133
ˆ “Restoring the Default Setting on the 10/100Base-TX Port” on
page 138
ˆ “Restoring the Default Values on the AT-CV5M02 Management Card”
on page 140
ˆ “Configuring the Temperature Threshold” on page 142
ˆ “Activating a Standby AT-CV5M02 Management Card” on page 144
ˆ “Setting the Baud Rate of the Console Port” on page 146
ˆ “Displaying the Operational Status of the Chassis” on page 148
ˆ “Pinging Network Devices” on page 152
ˆ “Displaying the Inter-process Communication Monitor” on page 153
ˆ “Displaying Information about the Management Card” on page 155