Allied Telesis AT-8000GS/48 - Manual (Page 20)

Chapter 1: Overview
20
Note
Please refer to Table 5, “Mode LED Indication (Non POE Only)” on
page 19 for the selection of the Mode using the front panel MODE
switch
Figure 10 RJ-45 Port LEDs for the AT-8000/24 and AT-8000/48
Each non-POE RJ-45 port has two LEDs, one for Link and one for Mode
status. The Link and Mode Port LED indications are described in the
following table:
Table 6 Port LED Mode/Indications for AT-8000GS/24 & AT-8000GS/48
Port
LED Port
Mode
LED
Indication
Description
Left
LED LINK
Solid Green A link is established on the port.
Off No link is established on the port.