Allied Telesis AlliedView-EMS 3.11 DEVICE MANAGEMENT - Manual (Page 83)

AlliedView™-EMS 3.11 Device Management Guide Page 83 of 402
Spanning Tree Info
Displays the port's spanning tree parameters.
Enable
Enables the port.
Disable
Disables the port.
Port Mirroring
Displays port mirroring parameters and allows configuration of port mirroring state,
source, and destination.
IGMP Snooping
Displays the current state of IGMP Snooping and allows reconfiguration.
Note - Valid MIB Set values for the IGMP Report Delay parameter should range from
5 to 30. However, the current firmware version does not allow it to be set to a
value greater than 10. Attempting to do so will result in the error message: "The
error occurred with 'Set' operation. Error: bad value."
Stacking Menu
From the Stacking menu, you can view basic switch information as well as stacking
information.
Stacking Info
Displays information such as Hardware Version, Firmware Version, Expansion Slot,
and Role In System for all switches in the stack.
AT-8324SX