Chapter 24, Radius commands, Chapter 24: radius commands – Allied Telesis AT-S63 User Manual
Page 447
Advertising
447
Chapter 24
RADIUS Commands
This chapter contains the following commands:
“ADD RADIUSSERVER” on page 448
“DELETE RADIUSSERVER” on page 450
“PURGE AUTHENTICATION” on page 451
“SET AUTHENTICATION” on page 452
“SHOW AUTHENTICATION” on page 453
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
In Version 3.2.0 of the AT-S63 Management Software, stacks
support the RADIUS protocol only for 802.1x port-based network
access control. Stacks do not support RADIUS or TACACS+
manager accounts.
Note
For overview information on this feature, refer to the AT-S63
Management Software Features Guide.
Advertising