10/100base-t non-poe port leds, Figure 4: poe port leds, Table 3. 10/100base-t poe port leds – Allied Telesis AT-FS750/24POE User Manual
Page 21: Ree leds as shown in figure 3 a, Table 3
AT-FS750/24POE Fast Ethernet Smart Switch Installation Guide
21
.
Figure 3. POE Port LEDs
10/100Base-T
Non-POE Port
LEDs
Ports 13 through 24 each have two LEDs as shown in Figure 3 and
described in Table 3
2
3
4
5
6
7
8
9
10
12
11
13
14
1
Table 3. 10/100Base-T POE Port LEDs
LED
State
Description
L/A
Green
A valid link has been established on the port.
Blinking
Green
The port is transmitting or receiving data.
Off
No link is established on the port.
100M
Green
A valid 100 Mbps link is established between
the uplink port and the end node.
Off
A valid 10 Mbps link is established between
the port and the end node.
PoE
Green
A PoE powered device is connected and is
receiving power.
Blinking
Green
PoE is off due to a failure on the POE
powered device.
Off
A PoE powered device is not connected.