Allied Telesis AT-8550SP - Manual (Page 47)

47
Chapter 2
Installation
This chapter provides the installation procedures for the switch and
contains the following sections:
ˆ “Reviewing Safety Precautions” on page 48
ˆ “Selecting a Site for the Switch” on page 51
ˆ “Planning the Installation” on page 52
ˆ “Unpacking the Switch” on page 54
ˆ “Installing the Switch in a Rack” on page 55
ˆ “Installing an Optional Expansion or Stacking Module” on page 58
ˆ “Installing an Optional GBIC” on page 60
ˆ “Installing an Optional SFP Transceiver” on page 62
ˆ “Cabling the Switch” on page 64
ˆ “Powering on an AC Powered Switch” on page 68
ˆ “Wiring and Powering on an DC Powered Unit” on page 70
ˆ “Starting a Local Management Session” on page 73
ˆ “Warranty Registration” on page 75
Note
To install an optional redundant power supply, refer to the
installation guide included with the unit.