Allied Telesis AT-МС602 - Manual (Page 26)

AT-MC601, AT-MC602 Installation and User’s Guide
26
Cabling the
Subscriber Unit
To cable the Subscriber unit, perform the following steps:
1. First, connect the Ethernet cable from the Ethernet port to the Ethernet
port on the computer, as shown in Figure 9.
Figure 9 Ethernet to Computer
2. Then, connect a telephone line cable from the PSTN port to the
telephone, as shown in Figure 10.
Figure 10 PSTN to Telephone
LINE
10BaseT/ 100BaseT X
PSTN
LINK
ACT
PWR
ERR
LINK
MGMT
AT-MC60
1 VDSL EX TENDED
ETHER NET
LINE
10BaseT/ 100BaseT X
PSTN
LINK
ACT
PWR
ERR
LINK
MGMT
AT-MC60
1 VDSL EX TENDED ETHER NET