Allied Telesis AlliedView-EMS 3.10 AMIGO - Manual (Page 25)

To add a target device, input a dotted IP address or a host name in the Host
name textbox, then click Add.
To change the properties of a specific target device, select the target device
from the list, then click the Property button. The "Target host property" dialog
box opens. Change the properties, then click OK.
To remove a target device from the list, select a device in the list then click
Delete.
Setting target devices tab
4.1.6.3 Target Host Property
In the "Target Host Property" dialog box, you can change various properties for
a specific target device by selecting a host, then clicking on the Property button.
Timeout
The time in seconds before AMIGO determines that the target device is
not responding.
Retry count
The number of SNMP messages to send before giving up.
AlliedView™-EMS 3.10 AMIGO USERS GUIDE Page 25 of 43