Allied Telesis AT-MCF2000 - Manual (Page 37)

AT-MCF2000 Multi-channel Media Converter Chassis Installation Guide
37
3. Align the edge of the module with the guides in the slot
and carefully slide the module into the chassis until it is
flush with the front of the chassis. Refer to Figure 16.
Light pressure may be necessary to seat the module
on the connector on the back panel of the chassis.
Caution
Do not force the module into place. Doing so may
damage the connector pins on the backplane inside
the chassis. If there is resistance, remove the module
and reinsert it after verifying that the edges of the card
are properly aligned with the guides in the chassis’
module slot.
Figure 16. Installing a Media Converter Module
1121-a
1
A T -MCF2012LC
AT-M CF 20 00