Preparing the site – Allied Telesis AT-MCR12 User Manual
Page 26
Chapter 2: Installation
26
Preparing the Site
Be sure to observe the following guidelines when planning the installation
of your chassis.
Make sure power for the chassis is accessible and cables can be
easily connected.
Cables must be away from sources of electrical noise such as radios,
transmitters, broadband amplifiers, power lines, fluorescent or halogen
light fixtures.
Air flow around the chassis and through its vents on the rear and side
panels should not be restricted.
If you are using the chassis on a desktop, make sure it is placed on a
level, secure surface.
Do not place objects on top of the chassis.
Do not expose the chassis to moisture or water.
Make sure the chassis is in a dust-free environment.
Use dedicated power circuits or power conditioners to supply reliable
electrical power to the network devices.