Set switch consoletimer – Allied Telesis AT-S63 User Manual
Page 86
Chapter 5: Basic Stack Commands
86
Section I: Basic Operations
SET SWITCH CONSOLETIMER
Syntax
set switch consoletimer=
value
Parameter
consoletimer
Specifies the console timer in minutes. The range is 1
to 60 minutes. The default is 10 minutes.
Description
This command sets the console timer, which the management software
uses to end inactive management sessions. The AT-S63 Management
Software automatically ends a management session if it does not detect
any activity from a local or remote management station for the length of
time specified by the console timer. This security feature can prevent
unauthorized individuals from using your management station should you
step away from your system while configuring a stack. To view the current
console timer setting, refer to “SHOW SWITCH” on page 95.
Example
The following command sets the console timer to 25 minutes:
set switch consoletimer=25