Allied Telesis AT-CV1000 - Manual (Page 17)

AT-CV1000 One-Slot Chassis Installation Guide
17
Blank Slot Cover
The AT-CV5PNL1 blank slot cover is designed to maintain optimal,
trouble-free environmental conditions for the AT-CV1000 chassis. An
unoccupied line card slot on the AT-CV1000 chassis should be covered
with a blank slot cover to keep dust from getting into the chassis and
maintain proper airflow, cooling, and ventilation throughout the chassis.
Figure 1 illustrates the AT-CV5PNL1 blank slot cover.
Figure 3. AT-CV5PNL1 Blank Slot Cover
Note
Allied Telesis strongly recommends that a blank slot cover be
inserted in any slot that does not contain a functioning line card.
To install a blank slot cover, refer to “Installing a Blank Slot Cover” on
page 37.
Note
Only the AT-CV5PNL1 of the AT-CV5PNLx blank cover series is
designed for the AT-CV1000 chassis. Be sure to ask for the
AT-CV5PNL1 if you need to order a new blank cover for this chassis.
222