Allied Telesis AT-S97 - Manual (Page 175)

175
Chapter 10
Telnet Server Commands
This chapter contains the following sections:
ˆ “Overview” on page 176
ˆ “TELNET DISABLE” on page 178
ˆ “TELNET ENABLE” on page 179
ˆ “TELNET SHOW” on page 180
Note
Remember to save your parameters changes in the active master
configuration file with the CONFIG SAVE command. For information,
refer to “Saving Your Configuration Changes” on page 17 or
“CONFIG SAVE” on page 142.