Allied Telesis AT-WCU201G - Manual (Page 68)

Chapter 3: Microsoft Windows XP
68
6. Click Key Index and specify the position of the encryption key in the
encryption key table on the wireless router or access point. The range
is 1 to 4.
7. Click OK.
WPA/WPA2-
PSK Security
To configure the Wireless Network Properties window for WPA-PSK or
WPA2-PSK security, do the following:
1. Click the Network Name (SSID) field, enter the SSID of the wireless
network. The network name is case sensitive.
2. Click the Network Authentication parameter and from the pull-down
menu select either WPA-PSK or WPA2-PSK.
Note
Do not select WPA2-PSK unless the wireless router or access point
supports WPA2.
3. Click the Data Encryption parameter and from the pull-down menu
select either TKIP or AES.
4. In the Network Key and Confirm Network Key fields, enter the router
or access point’s passphrase (also referred to as the shared secret).
5. Click OK.