Allied Telesis AT-FS202SC/FS1 - Manual (Page 43)

AT-FS20x Series Installation Guide
33
ˆ Check that the operating specifications of the fiber optic port on
the end-node are compatible with the operating specifications of
the fiber optic port on the converter. For fiber optic port
specifications, refer to “Fiber Optic Port Specifications” on
page 38.
If you are still experiencing problems after testing and troubleshooting the
installation, contact Allied Telesyn Technical Support for assistance.
Refer to “Contacting Allied Telesyn” on page x or visit our web site at
www.alliedtelesyn.com for support information.