Allied Telesis AT-S79 - Manual (Page 238)

Appendix A: AT-S79 Software Default Settings
238
Flow Control (Full-duplex Mode) Enabled
Back pressure (Half-duplex Mode) Enabled (not adjustable)
Port Mirroring
Status Disabled
VLAN
Name Default VLAN
VID 1
Ports All Ports (Untagged)
Quality of Service
Status Disabled
Mappings of IEEE 802.1p Priority
Levels to Egress Port Priority Queues See Table 2 on page 97.
Priority Override Status Disabled
Priority Queue Queue 0
RSTP
Status Disabled
802.1x Port-based Network Access Control
NAS ID Nas1
Port Control Force Authorized
Transmission Period 30 seconds
Supplicant Timeout 30 seconds
Server Timeout 30 seconds
Maximum Requests 2
Quiet Period 60 seconds
Re-authentication Period 3600 seconds
Re-authentication Status Disabled
RADIUS Client
Server IP Address 0.0.0.0
Shared Secret (blank)
Table 8. AT-S79 Default Settings (Continued)
Parameter Default Setting