Edge port, Chapter 7: spanning tree protocol (stp) 64 – Allied Telesis AT-S82 User Manual
Page 64
Chapter 7: Spanning Tree Protocol (STP)
64
Figure 25. Edge Port
A port can be both a point-to-point and an edge port at the same time. It
operates in full-duplex and has no STP or RSTP devices connected to it.
Figure 26 illustrates a port functioning as both a point-to-point and edge
port.
Figure 26. Point-to-Point and Edge Port
Determining whether a bridge port is point-to-point, edge, or both, can be
a bit confusing. For that reason, do not change the default values for this
RSTP feature unless you have a good grasp of the concept. In most
cases, the default values work well.
RSTP IEEE 802.1w is fully compliant with STP IEEE 802.1d. Your network
can consist of bridges running both protocols. STP and RSTP in the same
network can operate together to create a single spanning tree domain.
Edge Port
8
7
6
5
4
3
2
1
8
7
6
5
4
3
2
1
912
Point-to-Point and Edge Port
Workstation
(Full-duplex Mode)
912