Chapter 28 – Allied Telesis AT-S63 User Manual
Page 491
Advertising
491
Chapter 28
Port-based, Tagged, and Multiple Mode
VLAN Commands
This chapter contains the following commands:
“SET SWITCH INFILTERING” on page 503
“SET SWITCH VLANMODE” on page 504
Note
Remember to use the SAVE CONFIGURATION command to save
your changes on the switch.
Note
For background information on tagged and port-based VLANs, and
ingress filtering, refer to Chapter 24, “Port-based and Tagged
VLANs” in the AT-S63 Management Software Menus Interface
User’s Guide. For background information on the multiple VLAN
modes, refer to Chapter 26, “Multiple VLAN Modes” in the AT-S63
Management Software Menus Interface User’s Guide.
Advertising