Allied Telesis AT-9800 Series Switch - Manual (Page 3)

Quick Install Guide 3
C613-04038-01 REV H
Models Covered By This Guide
This Quick Install Guide includes information on the following models:
■ AT-9812T V2
■ AT-9816GB V2
Package Contents
The following items are included with each AT-9800 Series switch. Contact
your sales representative if any items are damaged or missing.
■ One AT-9800 Series switch
■ One AC power cord (for AC models)
■ One serial cable for connecting the switch to a terminal or PC
■ One 19 inch rack-mount kit
■ One AT-9800 Series Switch Quick Install Guide
■ One AT-9800 Series Safety and Statutory Information booklet
■ One AT-9800 Series Switch Documentation and Tools CD-ROM (which
includes the complete AT-9800 Series document set and utilities)
■ One warranty card
Selecting a Site
The switch can be installed in a standard 19-inch rack or on a level surface such
as a desktop or bench. When installing the switch, choose a site that:
■ allows adequate airflow around the switch and its vents.
■ is free of dust and moisture.
■ will maintain an ambient temperature range of 0–40º C (32–104º F) and a
humidity range of 5–95% non-condensing.
■ has a reliable and earthed (grounded) power supply circuit, preferably
dedicated and filtered.
■ does not expose cabling to sources of electrical noise, such as radio
transmitters, broadband amplifiers, power lines, electric motors, and
fluorescent fixtures.
■ allows easy access to the switch’s power and cable connections.
■ will allow all related network devices to be connected to the switch
without exceeding maximum cable length limitations. See the AT-9800
Series Switch Hardware Reference for cable length specifications.