Allied Telesis AT-ARW256E - Manual (Page 11)

AT-ARW256E Quick Installation Guide
iii Select the option Obtain an IP address automatically and click OK .
Click OK again to close.
Ensure that your Wireless ADSL Router is powered on. Restart your system.
Proceed to
Chapter 3 .
2.2 Installing the USB Device Driver
1. Proceed with this section ONLY if your computer/notebook is connected to
the USB Port of your Wireless ADSL Router!
2. The following screen shots illustrated serve only as examples. For any
dissimilarities, please follow closely the instructions prompted on your
Computer/Notebook.
3. For Windows® 98 Second Edition users, you may be prompted for your
Windows CD-ROM. Have it ready by your side.
2.2.1 Installing the USB Device Driver - For Windows® 98 Second
Edition
i
Power on your computer to start Windows.
ii Place the Installation CD into your CD-ROM Drive
iii At the following prompt, and click Next .
Page 11 of 32