Allied Telesis AT-LX3800U - Manual (Page 67)

AT-LX3800U Multi-Service Transport System Installation and Maintenance Guide
67
Note
These settings are for a DEC VT100 or ANSI terminal, or an
equivalent terminal emulation program.
The software initializes.
4. Press Return.
The Login prompt is displayed.
5. To configure chassis settings, enter “manager” as the user name. To
only view the settings, enter “operator” as the user name.
The Password prompt is displayed.
6. To configure chassis settings, enter “friend” as the password for a
manager login. To only view the settings, enter “operator” as the
password for an operator login.
The Main Menu is displayed, as shown in Figure 44
Figure 44. AT-S65 Main Menu
Refer to the AT-S65 Management Software User’s Guide for information
about how to move through the menus and make menu selections.
Allied Telesyn AT-LX3800
LX3800
Main Menu
Module Status and Configuration
Administration
System Configuration
Quit