Allied Telesis AT-VIEW PLUS 3.2 VLAN MANAGER - Manual (Page 22)

Allied Telesyn AT-VIEW PLUS
VLAN MANAGER
5.2.1.2 Adding/Removing Ports
You can add ports to or remove ports from a VLAN definition by clicking on the port images on
the device panel. Refer to
Section 4.2 - Device Panel for details on how to specify tagged and
untagged ports, uplink untagged and uplink tagged ports, private untagged and private tagged
ports, core and customer ports and to unselect ports.
Adding/Removing Ports
In the illustration above, a new VLAN definition is being created for a Rapier 24i. The VLAN
Name is "test" while its Identifier is "3". Ports 2 to 6 are untagged members while Port 1 is a
tagged member of the VLAN.
5.2.1.3 OK Button
The OK Button is disabled by default. It is only enabled when both the Name and Identifier fields
are populated. When the OK button is clicked, VLAN Manager adds the new VLAN definition to
the target host and updates the VLAN Information Window.
PN 613-50666-00 Rev C Page 22 of 59